Removing the stock bolts can be a pain to remove but we found if you take a propane torch to each bolt before trying to remove them it will break the loctite loose and the bolts will come out with ease. If you try and remove the stock bolts without a little heat chances are you'll strip the head of the bolt out. After removing the bolts and stock pegs just push out the stock brass bushing and leave the rubber bushing in. The 10mm bolt we provide reuses the rubber bushing to reduce vibration.
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
2 Reviews Hide Reviews Show Reviews
Just what I needed to complete my OEM foot peg replacement project. Fast shipping and first quality. Can't ask for more. I was a little concerned by the feel when I first put them together. These retain the rubber bushing from the stock but mount with the longer pictured screws. What it provides is a nice bit of vibration insulation. I have my pegs at the furthest position and was used to no movement when I pressed against them. These have a little movement by design and I don't even notice it any more. Worked perfectly for mounting my mini foot boards.
These adaptors were extremely easy to install...got them with Kury adaptors and Kury "Retro" pegs, which were assembled for me by Lamont's team before shipping. - In the video for these adaptors, Lamont stresses difficulties removing the OEM pegs...I got three of them off using his recommended method but the last one wouldn't break free because the internal bushing let loose...I had to end up hacksawing the bolt off to remove the OEM peg and bushing...not a fun job! However, this has NOTHING to do with how much I love the finished product. They function as advertised, look great and go on quickly. I would buy them again (if someone would remove the old pegs for me...I'm not going to tackle that again.) :-)