Spyder F3 Plug and Play Blinker Kit.
This Kit can be used on the side or in front above the headlights.
Should your blinkers go into Hyper-flash, you can try the following procedure to fix this.
1. Turn the key on and start the bike.
2. Hold down the hazard light switch on for 30-45 seconds.
3. Turn the hazards off and put the right signal on and turn the bike off right after the first blink on the blinker.
4. Repeat the same process for the left side.
Posted by David on Oct 21st 2016
top notch service with well design to plug and play. Very easy to install.
Posted by EDWARD MANCHENO on Jun 16th 2016
Very please with this purchase, arrived fast and easy to install, looks great on my 2016 F3 Series.... I referred my friend and he's ordering products as well, great products.
Posted by Mark Puglisi on Jan 26th 2016
Lamont consistently produces quality invasive products for the Spyder community. Can't say enough about this guy and the value.
Posted by Herb on Nov 3rd 2015
Congrats to whomever thought of this idea. Sometimes you can barely see the little green arrows on your dash but these jewels reflect enough so you know for sure if your signals are on or off and you're not looking like an idiot for miles with the indicators flashing. Very easy to install using the plug and play harness provided.
Posted by Dave B. on Nov 3rd 2015
Just as I hoped, the install was simple for a klutz like me and the lights are bright and very functional. I only hope they stay on for a long time as the adhesive may wear off in time with weather etc.
Posted by Steve 2015 F3S on May 26th 2015
Lets me know when signals are on/off. Lets traffic to your side know you are turning/lane changing. Blinked fast until programmed. Lamont got the info fast and walked me thru it. Took < 2 minutes. Only reason I did not give it a "5 Star" Buy it.