These are for All Can-Am Spyders 2013 and newer with the Brimbo Brake system.
This is a pair of Rotors.
Lamonster Garage had EBC make a beveled rotor from the factory for us. It took six months to get the product in hand but it's a done deal now. This eliminates the possibility of warpage from the rotor not setting flat on the hub. Both sides are beveled so you can't get it wrong.
We love these as replacement rotors for the OEM. If you get wheel hop in the front when you apply the brakes, chances are you have warped rotors. Since changing ours out to these we've yet to have a set go bad and that's after replacing two sets of the factory rotors.
The steel used in the EBC® rotor blades is a special stainless blend with higher friction effect than normal heat-treated stainless steel found on stock discs. Boasts up to 10% improvement in friction effect improving brakes even further. Weight of the X and XC series is reduced by 5–10% by using a six only button drive system on a lightweight alloy centre hub, which, once again, grabs the lead over stock parts. The SD-System™ uses a square-sided rivet with many advantages. The SD-System™ of square-sided buttons means that the rotor can expand inwards and outwards unrestrained and that perfect rotor functionality is retained at any speed or load.
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
1 Review Hide Reviews Show Reviews
Your the best