This kit is for the F3 Semi-Automatic (SE6)
This is the complete kit to convert your Spyder F3 to motorcycle like mirrors and lights. No more looking at your hands going down the road. This kit should take no more than an hour to install and everything can be put back to stock if you decide to sell your bike and move these parts to your new F3. This has been one of the most requested mods for the F3 and adds an extra safety factor by giving you better visibility no matter where your handlebars are turned. The best part is this looks factory!
Included in this kit is two billet 6061 aluminum brackets for mounting turn signal lights of your choosing. The light holes are drilled to 25/64 and will except a 3/8", 10mm and 5/16 stem. The stem is locked in place with a 1/4" 20 set screw. This opens up your options to any light within those sizes. Can also be used for mounting speakers or subwoofers. This is a very solid mount for just about anything you can dream up it it's intent is for mounting turn signals.
Also included in this kit is two F3 top caps that will work on left and right of a F3 SE or the right side only on the SM. Mirrors are included with this kit. This comes drilled and tapped for 1/4" 20 RAM mount and 10mm by 1.25 mirror mount. Two Ram balls included
With these caps you can mount any mirrors with a 10mm by 1.25 stud any of the RAM products we stock including X-grip phone mount, GPS mount, Cup holder, and camera mount. Great place to mount your action camera. This is made from 6061 billet aluminum and powder coated to match.
Posted by Jim on May 3rd 2016
Very well made product, install took about 20 min. fit finish and look spot on with bike. Tec. help on line great put my own led lights on and signals went into hyper flash tip to reset worked great.
Posted by Unknown on Jan 23rd 2016
But i will like to see led light on them in the future
Posted by Bert Kelsey on Jan 22nd 2016
Old mirrors were to far away for a good look. Now I see great and feel safer. The look with the new turn signals is much sleeker also.
Posted by Mark Puglisi on Jan 20th 2016
I can't say enough about this latest from Lamonster products. Huge improvement with the mirrors located on the handlebars. The blinker relocation adds a nice clean look and a simple plug and play harness too factory plug. Installation took all of 30 minutes.
Posted by Unknown on Jan 19th 2016
The look the mirror relocations and turn signals give the F3 is, in my opinion, sleek and slender. The install took less than one hour and was extremely simply to do. Lamonster is the go to man when it comes to modifications for the F3. Thanks for a wonderfully thought out product.