This kit includes two peg adapters and hardware, two Kury adpters and two Black Trident Large
The Lamonster F3 peg adapters allow you to install any Lamonster pegs including Grippers, Large Grippers and Chevrons. They will also allow you to install any of the Kuryakyn pegs with our Kury adapter. We stock the Widow pegs, Black Dually Trident, Black Trident Large and Black Wing Mini Boards. Now you can have something other than stock to set your F3 apart from all others and have choices to match the style of your ride.
The kit comes with all hardware for installing the peg adapter and pegs. The kit is sold as a set (two adapters and two pegs). These can be used as the driver pegs or passenger pegs. If you want matching pegs for front and rear you have to order a quantity of two. That will give you four pegs and four adapters.
Removing the stock bolts can be a pain to remove but we found if you take a propane torch to each bolt before trying to remove them it will break the loctite loose and the bolts will come out with ease. If you try and remove the stock bolts without a little heat chances are you'll strip the head of the bolt out. After removing the bolts and stock pegs just push out the stock brass bushing and leave the rubber bushing in. The 10mm bolt we provide reuses the rubber bushing to reduce vibration.