This kit includes the Lamonster Billet Gripper Pegs. Nothing else is required to complete the install.
As of 4-15-2014 the NBV's no longer come with the 4" curved link, 99% of our customers are happy with the 20 degree link.
Some were adding both links together and that is NOT recommend as it causes too much leverage on the brackets.
These highway brackets were designed in 2010 for the Spyder RT and will work will all current production Spyder RT’s including the 2014-17 RT. These are by far the most popular highway bracket for the RT because of the ease of installation and the added rider comfort.
Install instructions and install video can be found here—> NBV Instructions
The rear pin on the air deflector will not go back in the hole and is not need. The bracket holds the fin out. This is not a problem it is a result of adding the bracket. Nothing will fall off and nothing will be gained by having that pin in place.
We have some fixed rate shipping charges for out of country orders but sometimes we can do better if you email us your address and the product you would like to order. We can then calculate shipping cost more accurately and perhaps save you some money. You can email us at LamonsterGarageSales@gmail.com
Posted by Unknown on May 20th 2017
Easy to install..
Posted by Unknown on May 11th 2017
Followed the YouTube install..piece of cake! Word of caution though..if you have a newer model than the 2013 in the video, be careful pulling the clips on the fins. The newer models are attached with a push pin. I pulled on those suckers like he did and totally broke off the inner panel clips. Hoping the dealer can replace them. Might want to add a note/disclaimer to the video for future buyers. I love the brackets!
Posted by Unknown on May 1st 2017
Saw highway brackets on Lamonster YouTube and ordered them. Shipped same day and had them in my hands two days later. Easy install, allow about 15 minutes each side. Look good and comfortable position for feet. Finally can stretch out my legs on long ride. Thanks Lamonster.....keep up the good work.
Posted by Unknown on Apr 22nd 2017
These will help a rider with longer legs have some more room to stretch out and keep cramps, etc from happening!
Posted by Todd on Jan 23rd 2017
Nothing about this kit is low quality. The milled metal is nicely finished and packaged very well. It is very well thought out, and looks fantastic.
Posted by Mark Murphy on Oct 20th 2016
good video so no problems installing, took 1 hr from start to finish. had to change (R) bottom cover would not fit back on at all.
Posted by Unknown on Aug 1st 2016
Love them. I got the black and they look great on my bike. Easy to install with the help of your video.
Posted by Steve Spencer on Jun 13th 2016
and will continue to do business with them.
Posted by Unknown on May 9th 2016
Installation was pretty easy. FYI I forgot to undo the bottom tabs on the left side and broke the plastic piece and had to repair it and the bottom left tab is not supposed to snap in according to Jacob. Pleased with the finish.
Posted by Dennis Kehiaiain (NC) on Oct 15th 2015
Lamonster Garage - Delivery was extremely fast. (Thank You!)
Quality Product. - The NBV -small bracket with 20@ bend could have been a little taller for better adjustment. However the produce worked our nicely for my son.