Product Description
If you've ever had to jump start your Spyder you know what a pain it can be to get the clamps on. If it's not clamped right you won't get a good jump. These stainless steel battery post risers will solve that problem. This will give to an easy way to safely clamp to your post without worrying about shorting out on something. We've been using them on all our Spyders for years but it's the first time we've offered them in the store. It takes a little work to get them on at first but it's well worth the time. Watch the video below and you can see why this is a Lamonster Approved mod.
FITS ALL F3 Models
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
10 Reviews Hide Reviews Show Reviews
-
Battery post riser
These posts are too tall for my 2021 Spyder
-
battery post risers
Good idea works well thanks
-
Battery Post Risers
I installed the riser on the negative post but it would not fit on the positive post. They need to be shorter.
-
Battery Post Extension
Item arrived very quickly. Very easy to install
-
Battery post risers
Great design, but I could not use them as intended. My positive post cable is too short to maneuver into the position needed and I did not want to twist or try to bend the terminal.
-
Nice idea but not for tight spaces
I really like this idea so thought I'd use them on my replacement battery for 2014 Spyder RT. Unfortunately the battery compartment is a little too cramped to have a bare post sticking up unprotected like that, particularly with lead wires screwed onto it. Nicely made though.
-
Battery Post Risers
I put this on a 2020 F3 Limited. Easy install not modifications needed…it is one of those simple low cost items that gives you some piece of mind in case you ever need it for jump starting.
-
Risers
This is one of those mods you hope you never need but are glad you have them if you do. Easy to install and highly recommended. Thanks.
-
Battery post risers
Nice product & neatly machined. But ... The risers are too tall when installed on the battery, they need to be 1/4 inch shorter so they do not hit the plastic opening for battery placement. Install was attempted on my 2019 Spyder RT Limited. Decided to Not cut into plastic frame of opening so that risers would fit into battery space. Then the cover plate w/ foam seal may not seal out dirt, dust properly.