Free Shipping on most U.S. Orders over $75

2020/21 RT Floorboard Riser Install

Install Video


These instructions will help you properly install this product. This is a very easy install and you only need one tool, a 8mm Allen wrench.


Remove the three bolts holding the board in place.



Install floorboard riser to floorboard with provided stainless bolts and washers. Hand tighten bolts.

Make sure the offset is pointing toward the mounting lugs on the Spyder.




Install floorboard with riser using stock bolts and washers. Tighten all bolts with 8mm wrench.