BRAKE STROBE NOW BUILT INTO THE SET, NO EXTRA MODULE NEEDED.
WOW, It's got BRAKE. RUNNING AND TURN SIGNALS all in one! NOW THEY WILL SEE YOU STOPPING!
Very BRIGHT LED Lighting that is easy to install with PLUG -N- Play.
The new STROBE function is set to 3 RAPID Flashes and it will not repeat until you hit your brake again.
Designed to Comply with state laws that prohibit all OEM lights from strobing.
Get there attention now, Grab some of these and share with a friend.
Comes with everything you will need to get the job done.
The kit was designed for the Can-Am Spyder RT, RT-S and RT-L for years 2014 through 2017. The kit will work on prior years but may experiance Hyper Flash.
Posted by Joann on Oct 14th 2017
Needed lights to be more visible while out riding! Saw someone else with a similar set up. Ordered these hoping they would work but afraid I might need to have them installed. They arrived within no time at all. My husband and I looked at them and the directions and decided to try installing them ourselves. What an easy job! The instructions were easy to follow. And they look like a pro installed them. They work great and now I am highly visible! I have the led light kit for my mirrors now to install. Will order the Magic Mirrors first and install them at the same time! Wouldn’t hesitate getting this light kit! Easy to install and looks great!!!
Posted by Kristie Burns on Oct 13th 2017
The back of the bike is incredible with this product! I feel much safer and better seen at night. Install was super simple. Way easier than I thought. To get the headlights back on, you have to make sure to get the bottom peg in the slot and to get the trunk to close again when all done, there is one stupid tab you have to align. Once I googled the trouble, it was EASY! even with the hiccup, took me less than an hour for the whole job! Definitely an incredible addition!!!
Posted by Don T. on Oct 13th 2017
Love the way all strips are sub-surface in the gaps. These are really a huge improvement over the stock tights. The wife doesn't impress easily, but she really had great things to say about how these lit up the back of the bike. Love plug and play--only way to go.
Posted by Ed on Sep 7th 2017
The lights was easy to install and the instructions was easy to follow. After installing the lights, they really looks and works great. I would recommend these lights for the rear of the RT Spyder.
Posted by curtis on Jun 25th 2017
looks great gets people's attention behind you.
Posted by Mike on May 14th 2017
This kit arrived within two days of ordering despite severe flooding in the Nixa, MO area. The instructions were easy to understand with clear pictures that illustrated the steps. It installed easily and really adds an important degree of safety to our RT. The rear of the Spyder is significantly more noticeable and we feel safer when cars approach from the rear. Highly recommend this kit and Lamonster Garage products!
Posted by Bruce Westphal on Apr 27th 2017
yes it was easy to get things off the bike and to glue the lights on the bike but to get the wiring in so it looked good and didn't get pinched was a bit hard, but got every thing back together.
I have a 2016 rt, and I have to take care of hipper flash. I am going to take care that tomorrow. But all and all it was easy to put the lights on and get them to work, and like the guy said earlier they are a lot better on the bike than in the picture. I like them a lot.
Posted by JAS on Apr 27th 2017
Requires removing panels which concerned me but instructions were very plain and it was easy to do with simple tools.
Lights fit great and worked.
Posted by Kathy on Jun 14th 2016
So, it really is easy to install. Great instructions with lots of color photos to explain each step. Helpful as I do not use tools and seldom DIY. I had two hiccups which had nothing to do with the product. First, I have a 2015 RT-S but still got the hyperflash. Lamonster has instructions on how to re-calibrate the electronics to get rid of that (and they emailed me at 11pm to tell me - great customer service!!). Second, in putting the rear panel back on, I didn't have that one tiny tab in the right place so trunk wouldn't close. Once I figured that out, I was good, and the lights are AWESOME!! Very visible, and friends who have just the 3rd & 4th brake lights are so jealous of my super bright turn signals..
Posted by Rod Karnitz on May 9th 2016
The kit was very easy to install. They look even better than the pictures.