Product Description
Protect the front underside of your Can-Am Spyder F3 with the Spyderpops BumpSkid. Designed for 2015 and newer Can-Am Spyder F3 models, this lower front skid plate helps protect the nose and underside from common road hazards, driveway approaches, speed bumps, dips, curbs, and light scraping.
The BumpSkid also gives the front of your Spyder a cleaner, more finished look while adding practical protection where F3 models are most likely to contact the ground.
Features
- Spyderpops BumpSkid for Can-Am Spyder F3 models
- Helps protect the front underside and lower nose area
- Useful for driveways, speed bumps, dips, curbs, and light scraping
- Adds a clean finished look to the front of the Spyder
- Great protection upgrade for touring and daily riding
- Fits F3, F3-S, F3-T, and F3 Limited / F3-LTD models
- Spyderpops part number SPY-161
Fitment
Fits:
- Can-Am Spyder F3: 2015+
- Can-Am Spyder F3-S: 2015+
- Can-Am Spyder F3-T: 2016+
- Can-Am Spyder F3 Limited / F3-LTD: 2016+
Does not fit:
- Models equipped with the SS Grill
Important Fitment Note
This BumpSkid does not work with the SS Grill.
If you have any questions about this product email us at support@lamonstergarage.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
33 Reviews Hide Reviews Show Reviews
-
One of the first things on my new Spyder F3-T Limited
The BumpSkid seems to finish off the front of the bike. We had no problem installing it. It looks so nice and professional that no one would even guess that it was a later addition. And, best of all, it protects the low front underside and any front bumping which might inadvertently occur. The directions were easy to follow. It will always be one of the first things I put on any new Spyder I get.
-
Bump Skid
Excellent product--looks great on my F3's.
-
Bump Skid
Excellent product--looks great on my F3's.
-
Grille Saver!
This was simple to install and looks good on the F3. Would post a pic but can't.
-
Great Product
Another must have for any Spyder.
-
Customized by crash
After installing my brand new SS Grill, I backed out of the driveway and high centered and broke the scoop right of the grill. Well it broke off on the corners if the grill and was hardly noticeable, so with a bit of touch-up work looked like it was never there. Well this left the bottom of the trunk smooth so that F3 Bumpskid would fit on my F3T. After an hour the Bumpskid arrived the job was complete. It went on as the instructions said and looks GREAT. The grill was doomed the way BRP designed it, and the Bumskid solved a host of future problens. Lamont and company put togather a superior product, and I hardly recommend the Bumpskid for all F3's. To bad I can't attach a picture so you can see how great it looks.
-
Great product
Easy to install ,but was cautious about screws so close to coolant radiator . Went good , no leaks . Good product .
-
One of the best additions to any new Spyder
Straight froward, relatively easy installation. Used car ramps to elevate the front end. Had to put a 2x4 blocks on the ramp to get enuf elevation to drill. The spring nuts are really stiff and difficult to move into place, but it just takes patience. Looks great. Functions well! Wouldn't have a Spyder without one!
-
Easy to install if you have a lift..
As I did not have a lift and Sears removed the 1500lb one from it site it was quite a job to jack the front-end up high enough as to drill the holes via the pattern, also a stubby 1/4 carbide tip drill would be nice in the package. The steel frame is pretty tough for the two rear holes..other than that smooth as silk..
