Product Description
Add more rear visibility to your Can-Am Spyder RT with the Spyderpops BRT Rear Lighting Kit. This four-section LED kit adds brake, running light, turn signal, and brake strobe functionality in one clean plug-and-play setup.
The brake strobe function is built into the kit, so no extra strobe module is needed. When the brake is applied, the lights flash 3 rapid times and then return to normal brake light operation until the brake is applied again.
The bright LED design helps make your Spyder RT more noticeable from the rear during braking, turning, and nighttime riding. The kit comes with everything needed for installation and is designed for easy plug-and-play setup.
Designed for 2014–2019 Can-Am Spyder RT, RT-S, and RT Limited models. The kit may work on prior RT years, but earlier models may experience hyper flash. Contact Lamonster Garage before ordering for 2010–2013 RT fitment.
FEATURES:
- Spyderpops BRT rear LED lighting kit
- Adds brake, running light, and turn signal functionality
- Four-section rear lighting design
- Built-in brake strobe function
- Brake strobe flashes 3 rapid times when the brake is applied
- No extra strobe module needed
- Plug-and-play installation
- Comes with everything needed for installation
- Designed for 2014–2019 Can-Am Spyder RT, RT-S, and RT Limited models
- Prior RT years may experience hyper flash
- Spyderpops SKU: SPY-184
FITMENT:
- 2014 Can-Am Spyder RT / RT-S / RT Limited
- 2015 Can-Am Spyder RT / RT-S / RT Limited
- 2016 Can-Am Spyder RT / RT-S / RT Limited
- 2017 Can-Am Spyder RT / RT-S / RT Limited
- 2018 Can-Am Spyder RT / RT-S / RT Limited
- 2019 Can-Am Spyder RT / RT-S / RT Limited
Fitment Note: The kit may work on earlier RT models, but 2010–2013 RT models may experience hyper flash. Verify fitment before ordering for pre-2014 RT models.
If you have any questions about this product email us at support@lamonstergarage.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
57 Reviews Hide Reviews Show Reviews
-
Awesome and Install simple
The back of the bike is incredible with this product! I feel much safer and better seen at night. Install was super simple. Way easier than I thought. To get the headlights back on, you have to make sure to get the bottom peg in the slot and to get the trunk to close again when all done, there is one stupid tab you have to align. Once I googled the trouble, it was EASY! even with the hiccup, took me less than an hour for the whole job! Definitely an incredible addition!!!
-
Really pops on an all black RT
Love the way all strips are sub-surface in the gaps. These are really a huge improvement over the stock tights. The wife doesn't impress easily, but she really had great things to say about how these lit up the back of the bike. Love plug and play--only way to go.
-
A Great Product
The lights was easy to install and the instructions was easy to follow. After installing the lights, they really looks and works great. I would recommend these lights for the rear of the RT Spyder.
-
safety and looks
looks great gets people's attention behind you.
-
easy to install! great safety addition
This kit arrived within two days of ordering despite severe flooding in the Nixa, MO area. The instructions were easy to understand with clear pictures that illustrated the steps. It installed easily and really adds an important degree of safety to our RT. The rear of the Spyder is significantly more noticeable and we feel safer when cars approach from the rear. Highly recommend this kit and Lamonster Garage products!
-
not hard to get the bike apart, but a little hard to get it back together
yes it was easy to get things off the bike and to glue the lights on the bike but to get the wiring in so it looked good and didn't get pinched was a bit hard, but got every thing back together. I have a 2016 rt, and I have to take care of hipper flash. I am going to take care that tomorrow. But all and all it was easy to put the lights on and get them to work, and like the guy said earlier they are a lot better on the bike than in the picture. I like them a lot. Thank you Bruce W.
-
Bright, factory finished look
Requires removing panels which concerned me but instructions were very plain and it was easy to do with simple tools. Lights fit great and worked.
-
Mechanically challenged, yet I could do this!
So, it really is easy to install. Great instructions with lots of color photos to explain each step. Helpful as I do not use tools and seldom DIY. I had two hiccups which had nothing to do with the product. First, I have a 2015 RT-S but still got the hyperflash. Lamonster has instructions on how to re-calibrate the electronics to get rid of that (and they emailed me at 11pm to tell me - great customer service!!). Second, in putting the rear panel back on, I didn't have that one tiny tab in the right place so trunk wouldn't close. Once I figured that out, I was good, and the lights are AWESOME!! Very visible, and friends who have just the 3rd & 4th brake lights are so jealous of my super bright turn signals..
-
Super easy to install
The kit was very easy to install. They look even better than the pictures.
