Product Description
Rear BRT LED Lighting Kit for Can-Am Spyder F3 / F3-S — SPY-182
WILL NOT FIT F3T OR F3-LIMITED or DAYTONA EDITION
The Rear BRT LED Lighting Kit is a rear-visibility upgrade for Can-Am Spyder F3 and F3-S riders who want to be seen better from behind. This kit adds brake, run, and turn signal lighting with a built-in brake strobe feature, giving following traffic a brighter visual cue when you are stopping or signaling.
This updated kit includes 3 LED strips in one package. The top LEDs and fender-area LEDs work together to improve rear lighting presence, while the brake strobe feature provides 3 rapid flashes followed by 3 slow flashes, then holds steady until you release the brake pedal.
Fitment
Fits:
- Can-Am Spyder F3 2015 - 2026
- Can-Am Spyder F3-S 2015 - 2026
Important fitment note: This kit will not fit F3-T, F3 Limited, or Daytona Edition models. Confirm your exact year, model, and trim before ordering.
What’s Included
- Rear BRT LED Lighting Kit
- 3 LED lighting strips
- Brake / run / turn signal lighting functions
- Built-in brake strobe feature
Key Benefits
- Adds rear brake, run, and turn signal lighting
- Includes 3 LED strips
- Built-in strobe brake light feature
- Strobe pattern: 3 rapid flashes, 3 slow flashes, then steady-on
- Helps improve rearward visibility
- Adds lighting to the top and fender areas
- Strong visibility upgrade for F3 and F3-S riders
- Useful for daytime visibility, group rides, and touring
- Spyderpops branded lighting kit
- Affordable rear lighting upgrade
Installation Notes
Install the LED strips according to the included instructions and verify brake, run, turn signal, and strobe functions before riding. If the blinkers go into hyper-flash after installation, follow the steps below, Reset procedure using the hazard switch and individual turn signals.
Hyper Flash Blinker:
Should your blinkers go into Hyper-flash, you can try the following procedure to fix this.
1. Turn the key on and start the bike.
2. Hold down the hazard light switch on for 30-45 seconds.
3. Turn the hazards off and put the right signal on and turn the bike off right after the first blink on the blinker.
4. Repeat the same process for the left side.
Looking for more lighting upgrades? Browse our full selection of Can-Am Spyder F3 Lighting
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
24 Reviews Hide Reviews Show Reviews
-
Great rear lights for the F3
Adds much needed rearward visibility to the F3.
-
CAN-AM SPYDER F3 & F3S REAR BRT LIGHTING KIT - BRAKE/RUN/TURN, INCLUDES STROBE FEATURE.
It wasn't as easy as I thought it was going to be to install. I can't get the blinkers reset to blink at a normal rate no matter what I try. My hours at work don't allow for me to call in for help. They are crazy bright!!!
-
F3 brake light with strobe feature
Product arrived quickly however one set of LEDs was not working. I called customer service and a replacement was sent out immediately. I was very impressed with the service and efficiency of the customer service group. These are good people to buy from. You satisfaction seems to be a high priority to them.
-
WHOA!
I had this product installed by my Can-Am dealer, but they said it installed quickly and easily (they had had the same experience with other Lamonster Garage products). It REALLY makes my bike's brake lights AND TURN SIGNALS MUCH easier to see from behind. I feel a LOT safer with this modification to my bike.
-
bonvoyageboating@mac.com
2017 F3S with Corbin saddlebags. Put the bottom strips on the rod holding the saddlebags. Looks great. I can send pics. Install was relatively easy.
-
CAN-AM SPYDER F3 & F3S REAR BRT LIGHTING KIT - BRAKE/RUN/TURN, INCLUDES STROBE FEATURE.
On the stock F3-s the Visibility of the brake lights and turn signals to other motorists Without this kit was nill. Package came complete with install directions. Very easy to install.
-
Fe s rear brt lighting.
Went together very easily and worked the first time.
-
Great lights and safety for Spyder ryders
I am blown away by how much additional light this kit provides. Breaking and turning signals on the rear of the Spyder are much more pronounced now. People easily see me slowing or turning even if they are distracted. Easy install. Great instructions provided in the kit. Another two thumbs up for Lamonster.
-
10X more visible!
Riding with my friends I was always told my brake lights were dim. So I bought Lamonsters LED taillights. Still not enough but this easy to install kit did the trick! I am now seen. As well super fast shipping
-
Must have
This is the ultimate in rear safety lighting for your Spyder. The strobe feature really gets you noticed. Integrated turn signal feature is a great addition. You can tell drivers see you and know what you are doing. Very easy to install maybe 20 minutes.
-
Bright lights for the big city
I feel this light kit is a must for city driving. You will be seen from behind. The install at first seemed daunting but it really was not. Took about 45 minutes I am not a wrench turner so I took my time to double check everything. In the end, it was truly an easy install. Definitely this is a must buy.
-
Wow! Lights up the whole byke!
The lights are phenomenal. When I step on the brakes and/or use the turn signals, the whole back end of the byke lights up. Finally... I'll "be seen"! I love the strobe feature! Was an easy install. Love them.
