Product Description
This are the Bajaron “anti” sway bars with Billet links.
Fits all 2013 - 2019 RT Models.
RT, RT-S, RT-LTD
They come with billet aluminum links. These are heavier than the stock bar and are only sold with the billet links for safety. The improvement is noticeable from the time you pull out of the parking lot. If you ride two-up this is a must have accessory. Greatly reduces the wandering feeling and front end dive in the turns.
Color of the bar is now BLACK
NOTE: Lamonster® Links do NOT require spacers.
The 2013 and 2014 are exactly the same bar but the install is a little different so make sure you download the proper instructions or view them here on the site.
Click —> Here to download 2014-2019 PDF file
Click —> Here to download 2013 PDF file
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
157 Reviews Hide Reviews Show Reviews
-
Lid Lox
Second bike I have installed these on. Easy install, works great.
-
Bajaron sway bar for can am spyder
Installed yesterday. What a difference much better cornering
-
What a difference it makes
I installed it myself, a lot easier than I imagined, it sure makes a difference in the way my spyder handles , I wish I would have installed this sooner.
-
Bajah Spyder RT sway bar
Easy install and and 5 star improvement 2018 RT Limited stability.
-
sway bar
It was easy to put on and so far it's working great .
-
Bajaron Sway Bar.
Definitely worth the money. Makes your Spyder stick to the road like its on rails.
-
good stuff
I am looking forward to using it. Should have paid more attention to the description of the sway bar . I didn't need to order extra link's . I really like the magic mirrors.
-
sway bar kit
We ordered the sway bar kit for my wife 2015 Rt in the corners the bike with the lean too much for her she's not real small so it means a lot we purchased the sway bar kit and installed it in about an hour and a half two two hours very simple very easy great instructions with kit went on a 8 hour ride the next day she stayed right with me on my Harley through the curves sometimes even catching up and acting like she wanted to pass me so if anybody is looking for a great handling Spyder the sway bar kit is a number one I highly highly recommended it
-
works great
I have only drove around town since I put it on. I have rode it very hard. You can tell the difference. I love it! The bike handles so much better. It took me 1.5 hours to install. Now that I have done it. I could do it in less time. So, the directions are very accurate. Thanks for carrying so much stuff for my can am!
-
Swaybar purchase
I highly recommend your company for future purchase of accessories for my Spyder. Your customer service was very helpful.
-
Best bang for your buck!!
Best investment/mod you can do for your Spyder. Vastly improves the handling. Definitely recommend it.
-
Great product, straightforward install!
The install directions were straightforward. Probably the most challenging part was getting the inner grill tupperware disentangled from the bike. Releasing the old heim links and bar and installing the new parts were simple with reasonable access for the tools. The only issue is that they are not kidding about needing 22 inches below the frame rail to remove/replace the bar. My jack stands gave me only about 19 inches clearance, which wasn't enough. I put my lift under the bike and raised it to its highest extension (leaving the rear tire on the ground for stability). This gave me just enough clearance to slip the old bar out and the new one in. I then let the bike back down onto the jack stands to finish bolting everything up and putting the tupperware back together. I installed the Lamonster highway pegs at the same time as I already had the panels off in the required area.
