Product Description
The Missing Belt Guard is a smart protection upgrade for 2014–present Can-Am Spyder RT models with the 1330 engine. This guard helps protect the drive belt from stones, gravel, and road debris that can get between the belt and rear sprocket, potentially causing expensive damage that may not be covered under warranty.
This special belt guard attaches to the left swing arm and helps block debris before it reaches the drive belt and sprocket area. It is made from black polycarbonate, giving it the thin, lightweight, strong, and durable design needed for the tight clearance between the tire and belt.
Fitment
Fits:
- Can-Am Spyder RT 1330 — 2014–present
- Can-Am Spyder RT-S 1330 — 2014–2019
- Can-Am Spyder RT Limited 1330 — 2014–present
- Can-Am Spyder RT Sea-to-Sky 1330 — 2021–present
Fitment note: This listing is for 2014–present RT models with the 1330 engine.
What’s Included
- Spyderpops Missing Belt Guard / Black polycarbonate belt guard
- Installation hardware
- Complete installation instructions
Key Benefits
- Helps protect the Spyder RT drive belt from stones and debris
- Helps prevent debris from lodging in the rear sprocket
- Designed for 2014–present Spyder RT models with the 1330 engine
- Attaches to the left swing arm
- Lightweight black polycarbonate construction
- Thin material designed for the tight tire-to-belt clearance area
- Designed to tear away if needed instead of damaging the tire or belt
- Easy install with instructions and additional hardware
- Strong protection upgrade for gravel roads, parking lots, and touring use
- Made in the USA
Installation Notes
Install the Missing Belt Guard on the left swing arm using the included hardware and instructions. Confirm the guard is secure, properly positioned, and clear of the tire, belt, sprocket, and suspension movement before riding.
This is an easy install with complete instructions and additional hardware.
If you have any questions about this product email us at support@lamonstergarage.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
39 Reviews Hide Reviews Show Reviews
-
Belt Guard
Living on a dirt road and reading about rocks been caught in the belt and seeing the open side I figured that I needed something and this seemed to be the best product out there. The fit is perfect and it sticks tight. A great product and does what it is supposed too.
-
RT Missing Belt Guard
Haven't had any issues thus far, so I guess it's working. The install was a little more difficult than advertised, and the instructions were not much help.
-
Missing belt guard
Cheap insurance for those of us in rural areas where the occasional ride over rough roads are necessary
-
Does what it should do
pain to install, but easy
-
Belt guard
Not a good fit. Had to trim the vertical part close to the belt and trim the horizontal piece narrower at the front of it to make it fit proper.
-
liked it but it fell off
had it installed by dealer. Seemed to fit nicely but now it's gone. Will try installing next one myself
-
alteration
had to widen the slot a little to clear weld bead on sides of tab
-
missing belt guard
easy to fit takes the stone chip worry away great
-
Should have got it sooner
Should have bought this sooner! Only 1200 miles on the Spyder and a hole was punched through the belt by a small rock, $400 to replace the belt. Easy to install, the adhesive used to mount it seems very strong, so better get it right the first time.
-
Missing Belt Guard
Fast delivery. Easy install. I hope it saves me from another very expensive belt and sprocket replacement.
-
good investment
Product quality/ease of installation as advertised.
-
Missing Belt Guard
Easy to install. I would have saved myself the cost of belt replacement if I had installed it before that darn rock...
